Swf embroidery machine parts list full size#
Swf embroidery machine parts list portable#

Press the +100 button (F1) nine times.Turn all of the heads on the machine on by pressing the Head On/Off Switch on the Thread Tension Unit.If you are not quite up to 1968, press and release the START button until you reach that number.Hold down the START button until you get somewhat near 1968.

This brings us up to stitch 1957 of 4807 as displayed on the Stitch Info screen.

To get close to our goal press the START button nine times.

100 stitch' which is fine for this example.

In this example, our goal is to get to 1968 so we need to change the increments we increase by to 100.

Watch the Stitch Info screen for details.

If during the course of pressing START to progress through the design you happened to go beyond to number of stitches you intended, press the STOP button to reverse the same amount of stitches.

Since earlier in this exercise we established being at stitch 57 this step took us to stitch 1057.

Press the DOWN button, which will take the cursor to '2.1000 stitch'.

For this example lets pretend we have a 4807-stitch design and we need to get to stitch number 1968.

Turn all of the heads on the machine back on by pressing the Head On/Off Switch.

For this example that took me to stitch 57.

Hesitate for approximately eight seconds then press the STOP button.

Turn all of the heads on the machine off by pressing the Head On/Off Switch on the Thread Tension Unit.

If you have sewn at least one stitch go to # 8, if not go to #4.

You must have at least one stitch sewn in the design for the float command to work.

How do I DELETE A DESIGN from the machine?.

Press the DOWN ARROW button (F2) to access the Y SATIN command (#6).

Press the DOWN ARROW button (F2) to access the X SATIN command (#5).

The machine will display Y SATIN: 0 These numbers represent the degree to which all satin columns within the design will be increased vertically.

Press the DOWN button to access the Y SATIN command (#7).

The machine will display X SATIN: 0 These numbers represent the degree to which all satin columns within the design will be increased horizontally.Press the DOWN button to access the X SATIN command (#6).This is the most preferred model for customers who are using the equipment as a production machine where space is not such a significant factor.

Swf embroidery machine parts list full size#

First true 3-way convertible machine than can run 3 shifts.Ĭlass 4: Full Size Bridge Style Frame same open back frame design as multi-head machines, most industrious commercial single-head on the market, most versatile frame, high capacity motors and cooling systems, adjustable support table, sturdy and virtually vibration-free frame. Good for samples, names, event or kiosk business, limited footprint for real estate sensitive facilities.Ĭlass 3: Full Size Arm Style Frame largest arm frame, industrial grade, typically 300 pounds, full commercial controller, adjustable support table, larger motors, wider sewing area than Class 2.

Swf embroidery machine parts list portable#

Below are the major classes of single-head machinery:Ĭlass 1: Tabletop / Portable Arm Style Frame small arm frame, quasi-industrial, typically less than 100 pounds, plastic housing, light duty motors, smaller sewing area, usually limited sewing area for caps.Ĭlass 2: Compact Arm Style Frame medium arm frame, entry level industrial, typically around 150-200 pounds, compact control system, no support table or non-adjustable table normally needed for excess fabric hanging down, large field cap system. For customers new to the embroidery machine industry, it is helpful to have an understanding of the classes of single-head embroidery machines and how they may meet your needs.